APP waterproofing membrane

The products of GECOFLEX range are designed for the specific needs of the professional roofers. The special characteristics of the new bituminous compound and the use of a reinforced non-woven polyester, makes GECOFLEX one of the most used product which can satisfy the most varied waterproofing requests. GECOFLEX is recommended for the waterproofing of flat and pitched roofs, shed roof, below ground level walls, etc. and for all structures subject to slow deformation. The self-protected mineral version is recommended to be laid as finishing layer in the multi-layer waterproofing.The PA versions are self protected on the upper face with mineral slates which reduce superficial heat absorption improving the durability of the membrane. The lower face of the membrane is finished with a PE film with striped embossing. The latter has the function of optimizing and maximizing adhesion of the membrane to the laying surface during hot application: respect at a traditional embossing, the surface is more uniform. The thousand lines per square meter operate a uniform marking and close-up of the PE film thus ensuring a homogeneous opening in the phase of application, obtaining the maximum adhesion to the application plan. Striped embossing facilitates the operator during the flaming because it requires less flame intensity and therefore less absorption of heat from the product itself, eliminating the problems of “Footprints” that occur on the upper face of the both smooth and slated products.